BS ISO 2328:2011 BSl Standards Publication Fork-lift trucks Hook- on type fork arms and fork arm carriages Mounting dimensions bsi. ..making excellence a habit. BS ISO2328:2011 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 2328:2011.It supersedes BS ISO 2328:2007 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MHE/7, Industrial trucks. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @BSI 2011 ISBN9780580656125 ICS 53.060 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31October 2011. Amendments issued since publication Date Textaffected BS ISO 2328:2011 INTERNATIONAL ISO STANDARD 2328 Fourth edition 2011-09-15 Fork-lift trucks Hook-on type fork arms and fork arm carriages Mounting dimensions Chariots élevateurs a fourcheBras de fourche a tenons ettabliers porte-fourchesDimensionsdemontage Referencenumber ISO 2328:2011(E) ISO @ISO 2011 BS ISO 2328:2011 ISO2328:2011(E) COPYRIGHTPROTECTEDDOCUMENT ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Casepostale 56 : CH-1211Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland ii @ ISO 2011 -All rights reserved BS ISO 2328:2011 ISO2328:2011(E) Foreword technical committees.Each member body interested in a subject for which a technical committee has been non-governmental, in liaison with isO, also take part in the work. isO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/lEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IsO shall not be held responsible for identifying any or all such patent rights. ISO2328waspreparedbyTechnicalCommitteeISO/TC110,Industrialtrucks,SubcommitteeSC2,Safetyof powered industrial trucks. This fourth edition cancels and replaces the third edition (iSO 2328:2007), which has been technically revised. ISO 2011 - All rights reserved ili BS ISO 2328:2011 BS ISO2328:2011 INTERNATIONALSTANDARD ISO 2328:2011(E) Fork-lifttrucksHook-ontypeforkarmsandforkarm carriagesMountingdimensions 1 Scope This International Standard specifies the dimensions of, and additional requirements for, fork carriers and the truck-rated capacity and fork arm type, on fork-lift trucks up to and including a rated capacity of 10 999 kg 2 Normativereferences The following referenced documents are indispensable for the application of this document. For dated references,onlytheeditioncitedapplies.Forundatedreferences,thelatesteditionofthereferenceddocument (including any amendments) applies. Iso2331,Forklifttrucks-Hook-ontypeforkarms—Vocabulary IsO3691-1, Industrialtrucks-Safety requirements and verificationPart 1:Self-propelled industrial trucks, 3Terms and definitions For the purposes of this document, the terms and definitions given in ISO 2331 and IsO 3691-1 apply.